The system be down for regular maintenance on April 3rd, 2024 from 8:00-10:00am.
Browsing Mechanical Engineering by Title
Now showing items 13-26 of 26
-
Reply to comment on: Lorentz violation in high-energy ions
(2017-06)This response clari es that, without accounting for the transverse Doppler e ect [1], the experimental analysis cannot rule-out (and develop bounds on) the Lorentz violation, especially since the energy of the transition ... -
A Scalable Low-Cost-UAV Traffic Network (uNet)
(2016-01)This article proposes a new Unmanned Aerial Vehicle (UAV) operation paradigm to enable a large number of relatively low-cost UAVs to fly beyond-line-of-sight without costly sensing and communication systems or substantial ... -
A SINGLE-CARD GPU IMPLEMENTATION OF PERIDYNAMICS
(2021)The rapid development of parallelization technology over the recent decades has provided a promising avenue for the acceleration of meshfree simulation methods. One such method, peridynamics, is particularly well-suited ... -
Supplemental Data for "Automatic Classification of Biological Targets in a Tidal Channel using a Multibeam Sonar"
(2019-05-07)These files accompany the manuscript "Automatic Classification of Biological Targets in a Tidal Channel using a Multibeam Sonar." The files include three data sets of target tracks from multibeam sonar data collected in ... -
Supplementary Data for "Implications of Biofouling on Cross-flow Turbine Performance"
(2019-05-16)These files accompany the manuscript "Implications of Biofouling on Cross-flow Turbine Performance". The files include 8 sets of fouled turbine performance data collected in the Alice C. Tyler recirculating water flume at ... -
Supplementary Information for "A Process for Estimating Minimum Feature Size in Selective Laser Sintering"
(2018)This document provides additional information, data, and results removed for conciseness from the publication: Weiss, B., Diegel, O., Storti, D., Ganter, M., 2018. "A Process for Estimating Minimum Feature Size in Selective ... -
Supplementary Material for "An Experimental Assessment of Analytical Blockage Corrections for Turbines"
(2019-06-04)These files accompany the manuscript “An Experimental Assessment of Analytical Blockage Corrections for Turbines”. The files include turbine performance data collected in the Alice C. Tyler recirculating water flume at the ... -
Supplementary material for "An experimental evaluation of blockage effects on the wake of a cross-flow current turbine"
(2020)These files accompany the manuscript "An experimental evaluation of blockage effects on the wake of a cross-flow current turbine". The files include turbine wake data collected in recirculating water flumes at the Bamfield ... -
Supplementary material for "Effect of Aspect Ratio on Cross-Flow Turbine Performance"
(Journal of Renewable and Sustainable Energy, 2020)These files support the manuscript "Effect of Aspect Ratio on Cross-Flow Turbine Performance". They include time-average turbine efficiency and non-dimensional parameter datasets for each of the associated turbine experiments, ... -
Supplementary material for "Effects of dimensionless parameters on the performance of a cross-flow current turbine"
(2021)These files accompany the manuscript "Effects of dimensionless parameters on the performance of a cross-flow current turbine". The files include turbine performance data collected in the Alice C. Tyler recirculating water ... -
Supplementary MATLAB toolbox and data for "Comparative evaluation of volumetric current measurements in a tidally-dominated, coastal setting with an emphasis on float swarms"
(2019)These files comprise the MATLAB code used to generate the results presented in "Comparative evaluation of volumetric current measurements in a tidally-dominated, coastal setting with an emphasis on float swarms," written ... -
Towards a General Method for Constructing Manufacturability Design Rules for an Additive Manufacturing Process
(2019-07)Additive manufacturing (AM) presents a unique set of manufacturability constraints, among the most important of which are the smallest producible feature size and the maximum overhang angle before support structures are ... -
Treat All Integrals as Volume Integrals: A unified, parallel, grid-based method for evaluation of volume, surface, and path integrals on implicitly defined domains
(2017-09)We present a unified method for numerical evaluation of volume, surface, and path integrals of smooth, bounded functions on implicitly defined bounded domains. The method avoids both the stochastic nature (and slow ... -
Variable Speed of Light Cosmology and Electromagnetism
(KDP, 2022)This work explores modifications of electromagnetism models to allow variable speed of light (VSL) without violating current observations and investigates the utility of VSL to explain anomalies (unexplainable observations) ...